Makita UR014G Instruction Manual
Cordless grass trimmer
Hide thumbs
Also See for UR014G:
- User manual ,
- Instruction manual (141 pages) ,
- Instruction manual (137 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita UR014G
Summary of Contents for Makita UR014G
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer UR014G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: UR014G Handle type Loop handle No load speed 0 - 5,700 min Overall length 1,857 mm (without cutting tool and battery) Nylon cord diameter 2.7 mm Applicable cutting tool and Nylon cutting head 450 mm cutting diameter (P/N 1911Y3-7) Rated voltage D.C. -
Page 3: General Power Tool Safety Warnings
Use personal protective equipment. Always SAFETY WARNINGS wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions General power tool safety warnings will reduce personal injuries. Prevent unintentional starting. Ensure the WARNING Read all safety warnings, instructions, switch is in the off-position before connecting illustrations and specifications provided with this... -
Page 4: Intended Use
Disconnect the plug from the power source Follow all charging instructions and do not and/or remove the battery pack, if detachable, charge the battery pack or tool outside the from the power tool before making any adjust- temperature range specified in the instruc- ments, changing accessories, or storing power tions. -
Page 5: Personal Protective Equipment
Personal protective equipment Electrical and battery safety Do not expose the tool to rain or wet condi- tions. Water entering the tool will increase the risk of electric shock. Do not use the tool if the switch does not turn it on and off. Any tool that cannot be con- trolled with the switch is dangerous and must be repaired. -
Page 6: Cutting Tools
Adjust the shoulder harness Adjust the 14. Never touch moving hazardous parts before hand grip to suit the operator's body size if the moving hazardous parts have come to adjustable. a complete stop and the battery cartridge is removed. When inserting a battery cartridge, keep the cutting attachment clear of your body and 15. - Page 7 Only use the cutting tool that are marked with Do not wash the tool with high pressure water. a speed equal or higher than the speed marked 12. When washing the tool, do not let water enter on the tool. the electrical mechanism such as battery, Always keep your hands, face, and clothes motor, and terminals.
- Page 8 SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. 8 ENGLISH...
-
Page 9: Parts Description
PARTS DESCRIPTION Fig.2 High-torque lamp Reverse lamp Caution lamp Main power lamp Reverse / high-torque Main power button Battery cartridge Switch trigger button Hanger Handle Protector Adjusting lever Lock-off lever Shoulder harness 9 ENGLISH... -
Page 10: Functional Description
Tool / battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a tool/battery protection system. This system automatically cuts off power to WARNING: Always be sure that the tool is the motor to extend tool and battery life. The tool will switched off and the battery cartridge is removed automatically stop during operation if the tool is placed before adjusting or checking function on the tool. -
Page 11: Main Power Switch
Indicating the remaining battery Main power switch capacity To turn on the tool, press the main power button. To turn off the tool, press and hold the main power button until Press the check button on the battery cartridge to indi- the main power lamp goes off. cate the remaining battery capacity. The indicator lamps light up for a few seconds. -
Page 12: Reverse Button
To prevent the switch trigger from being accidentally Reverse button pulled, a lock-off lever is provided. To start the tool, depress the lock-off lever and pull the switch trigger. WARNING: Release the switch trigger to stop. Switch off the tool and remove the battery cartridge before you remove entan- gled weeds or debris which the reverse rotation function can not remove. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up. -
Page 13: Electronic Function
Electric brake Hex wrench storage This tool is equipped with an electric brake. If the tool CAUTION: Be careful not to leave the hex consistently fails to quickly stop after the switch trigger wrench inserted in the tool head. It may cause is released, have the tool serviced at our service center. -
Page 14: Nylon Cutting Head
Nylon cutting head Remove the spool from the spool holder by hold- ing the nylon cord with your fingers and thumb, and NOTICE: Be sure to use genuine Makita nylon then hook both sides of the nylon cord to the notches of cutting head. the spool. Insert the hex wrench through the hole in the gear case to lock the spindle. -
Page 15: Operation
Makita. If you put on the shoulder harness included in the tool package and the shoulder harness of the back-... - Page 16 Clasp the hook on the shoulder harness to tool's Correct handling of the tool ring and hanger. WARNING: Always position the tool on your right-hand side. Correct positioning of the tool allows for maximum control and will reduce the risk of seri- ous personal injury.
-
Page 17: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the tool Clean the tool by wiping off dust, dirt, or cut off grass with a dry cloth or one dipped in soapy water and wrung out. - Page 18 121-SP 3 m (9 ft) 100 mm (3-15/16″) Fig.23 18 ENGLISH...
-
Page 19: Troubleshooting
TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Motor does not run. Battery cartridge is not installed. Install the battery cartridge. - Page 20 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885A06-926 www.makita.com 20221028...