Table of Contents
Advertisement
2.
Loosen the clamping nuts and pivot the upper
handle back while expanding the both sides.
1
► 1 . Clamping nut 2. Upper handle
3.
Store the grass basket between the handle and
the mower body.
► 1 . Grass basket
NOTE: When putting the mower in the upright posi-
tion, do not hold the handle but use the front grip of
the mower.
Removing or installing the mower
blade
WARNING:
Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING:
The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING:
Always wear gloves when han-
dling the blade.
Removing the mower blade
For DLM382
2
1.
height adjusting lever comes to the upper side.
2.
similar tool into a hole on the mower body.
3.
1
► 1 . Mower blade 2. Screwdriver 3. Wrench
4.
► 1 . Blade support 2. Mower blade 3. Bolt
For DLM432
1.
height adjusting lever comes to the upper side.
2.
similar tool into a hole on the mower body.
3.
► 1 . Mower blade 2. Screwdriver 3. Wrench
13 ENGLISH
Put the mower on its side so that the mowing
To lock the blade rotation, insert a screwdriver or a
Turn the bolt counterclockwise with the wrench.
1
2
Remove the bolt and blade in order.
Put the mower on its side so that the mowing
To lock the blade rotation, insert a screwdriver or a
Turn the bolt counterclockwise with the wrench.
1
2
3
1
2
3
3
Advertisement
Table of Contents
