Table of Contents
Advertisement
CAUTION:
After loading staples, make sure
that the sub magazine is surely closed. Falling
staples out of the magazine may cause an injury to
the operator or bystander, especially when working in
high locations.
1.
Remove the battery cartridge.
2.
Press the locking lever and slide the sub maga-
zine backward.
► 1 . Locking lever 2. Sub magazine
3.
Load staples into the main magazine with their
feet facing up.
► 1 . Staples 2. Main magazine
4.
After loading staples, push back the sub-maga-
zine in place until it clicks.
To remove staples, follow the installation procedures in
reverse.
Hook
CAUTION:
Do not hang the hook from the
waist belt. Dropping the stapler, which is caused by
the hook accidentally coming out of place, may cause
unintentional firing and result in personal injuries.
1
2
1
2
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
2
3
► 1 . Groove 2. Hook 3. Screw
OPERATION
Testing the safety system
WARNING:
Make sure all safety systems are
in working order before operation. Failure to do
so may cause personal injuries.
1
2
► 1 . Trigger-lock button 2. Switch trigger 3. Contact
element 4. Sub magazine
7 ENGLISH
1
3
4
Advertisement
Table of Contents
