Makita SG1250 Instruction Manual
Hide thumbs
Also See for SG1250:
- Instruction manual (65 pages) ,
- Instruction manual (57 pages) ,
- Instruction manual (61 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita SG1250
Summary of Contents for Makita SG1250
- Page 1 INSTRUCTION MANUAL Wall Chaser SG1250 004495 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model SG1250 Wheel diameter 125 mm European countries 10000(min Rated speed (n) / No load speed (n Other countries 9000(min Spindle thread Overall length 346 mm Net weight 4.4 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. -
Page 3: General Power Tool Safety Warnings
Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:... - Page 4 GEB042-3 of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or ANGLE CUTTER SAFETY jewellery. Keep your hair, clothing, and gloves WARNINGS away from moving parts. Loose clothes, jewellery or long hair can be caught in moving Safety Warnings Common for Abrasive Cutting-Off parts.
- Page 5 capable stopping small abrasive point of pinching. Abrasive wheels may also break under workpiece fragments. The eye protection must these conditions. be capable of stopping flying debris generated by Kickback is the result of power tool misuse and/or various operations . The dust mask or respirator incorrect operating procedures or conditions and can be must be capable of filtrating particles generated by avoided by taking proper precautions as given below.
- Page 6 Additional Safety Warnings Specific for Abrasive 23. Always be sure that the tool is switched off Cutting-Off Operations: and unplugged or that the battery cartridge is a) Do not “jam” the cut-off wheel or apply removed before carrying out any work on the excessive pressure.
-
Page 7: Functional Description
Switch action FUNCTIONAL DESCRIPTION 1. Slide switch CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Shaft lock 1. Shaft lock 004499 CAUTION: Before plugging in the tool, always check to see that the •... - Page 8 Loosen and remove the bolt with the hex wrench. Open the cover while holding the tool base with a hand Groove width: 30 mm Groove width: 27 mm as shown in the figure. 1. Blade case 2. Base Groove width: 24 mm Groove width: 21 mm 004501 NOTE:...
-
Page 9: Front Handle
Return the cover and the base to the original position and Connecting to vacuum cleaner tighten the bolt to secure them. 1. Dust nozzle Front handle 2. Vacuum cleaner 3. Hose 1. Front handle 2. Hex socket head bolt 004507 When you wish to perform cleaner operation, connect a vacuum cleaner to your tool. -
Page 10: Optional Accessories
If you need any assistance for more details regarding pushing away from you). Align the notch on the base with these accessories, ask your local Makita Service Center. your cutting line, push down the front handle gently until it Diamond wheels •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884514D221...