Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita ST113DZ
Summary of Contents for Makita ST113DZ
- Page 1 INSTRUCTION MANUAL Cordless Stapler ST113D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: ST113D Staple width 10 mm Applicable staples length 7 mm - 10 mm Staple magazine capacity 150 pcs Dimensions without hook (L x W x H) 211 mm x 81 mm x 159 mm Rated voltage D.C. 10.8 V Battery cartridge BL1015, BL1020B BL1040B... - Page 3 Do not operate power tools in explosive atmo- Power tool use and care spheres, such as in the presence of flammable Do not force the power tool. Use the correct liquids, gases or dust. Power tools create sparks power tool for your application. The correct which may ignite the dust or fumes. power tool will do the job better and safer at the Keep children and bystanders away while rate for which it was designed.
- Page 4 19. Never tamper with the contact element. Check the causing fires, personal injury and damage. It will contact element frequently for proper operations. also void the Makita warranty for the Makita tool and SAVE THESE INSTRUCTIONS. charger. 4 ENGLISH...
-
Page 5: Functional Description
Tips for maintaining maximum CAUTION: Always install the battery cartridge battery life fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to Charge the battery cartridge before completely you or someone around you. discharged. Always stop tool operation and charge the battery cartridge when you notice CAUTION: Do not install the battery cartridge... -
Page 6: Loading Staples
Lighting up the lamp Indicator lamps Remaining capacity CAUTION: Do not look in the light or see the Lighted source of light directly. 75% to 100% 50% to 75% 25% to 50% 0% to 25% NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. -
Page 7: Operation
CAUTION: After loading staples, make sure that the sub magazine is surely closed. Falling staples out of the magazine may cause an injury to the operator or bystander, especially when working in high locations. Remove the battery cartridge. Press the locking lever and slide the sub maga- zine backward. The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out. - Page 8 Test safety systems for possible fault before operation as follows. Unload staples from the tool and keep the sub magazine opened. Install the battery cartridge. Only pull the switch trigger without touching the contact element against the material. Only touch the contact element against the mate- rial without pulling the switch trigger. If the tool operates in the case of 3 and 4 above, the safety systems are faulty.
-
Page 9: Optional Accessories
Checking remaining staples OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885534-228 www.makita.com 20160801...