Specifications - Makita BHP459ZJ Instruction Manual

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Switch trigger
6 Lamp
7 Reversing switch lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
4
Explanation of general view
8 Speed change lever
9 Action mode changing ring
10 Adjusting ring
11 Graduation
12 Arrow
13 Sleeve
14 Groove
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
–1
)
Low (1)
High (2)
Low (1)
Overall length
Rated voltage
Battery cartridge
Net weight
CORDLESS HAMMER DRIVER DRILL SAFETY
WARNINGS
1. Wear ear protectors with impact drilling. Expo-
sure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
ENE079-1
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
GEA010-1
4. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. Hold the tool firmly.
7. Keep hands away from rotating parts.
8. Do not leave the tool running. Operate the tool
only when hand-held.
15 Hook
16 Screw
17 Bit holder
18 Bit
19 Vent
20 Blow-out bulb
BHP459
13 mm
13 mm
38 mm
6 mm x 75 mm
M6
0 – 1,500
0 – 400
0 – 22,500
0 – 6,000
192 mm
D.C. 18 V
BL1815
1.5 kg
BL1830
1.7 kg
GEB056-4