18 Bit Switch trigger 12 Arrow 19 Vent Lamp 13 Sleeve 20 Blow-out bulb Reversing switch lever 14 Groove SPECIFICATIONS Model BHP459 Concrete 13 mm Steel 13 mm Capacities Wood 38 mm Wood screw 6 mm x 75 mm Machine screw High (2) 0 –...
FUNCTIONAL DESCRIPTION Do not touch the bit or the workpiece immedi- ately after operation; they may be extremely hot CAUTION: and could burn your skin. • Always be sure that the tool is switched off and the bat- 10. Some material contains chemicals which may be tery cartridge is removed before adjusting or checking toxic.
Lighting up the lamp (Fig. 4) Adjusting the fastening torque (Fig. 7) The fastening torque can be adjusted in 16 steps by turn- CAUTION: ing the adjusting ring so that the graduations are aligned • Do not look in the light or see the source of light with the arrow on the tool body.
• These accessories or attachments are recommended Then proceed as follows. for use with your Makita tool specified in this manual. Place the point of the driver bit in the screw head and The use of any other accessories or attachments might apply pressure to the tool.
Page 8
For European countries only EC Declaration of Conformity Makita Corporation responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Hammer Driver Drill Model No./ Type: BHP459 are of series production and Conforms to the following European Directives:...