Makita CL003G Instruction Manual page 8

Hide thumbs Also See for CL003G:

Table of Contents

Cleaning (Suction)

Nozzle

With 250 mL dust case only

Attach the nozzle to clean off tables, desks, furniture,

etc. The nozzle slips on easily.

Fig.10

► 1. Nozzle

Nozzle + Extension wand (Straight pipe)

The extension wand fits in between the nozzle and the

cleaner itself. This arrangement is convenient for clean-

ing a floor in a standing position.

Fig.11

► 1. Cleaner body 2. Extension wand 3. Nozzle

Corner nozzle

Fit on the corner nozzle for cleaning corners and crev-

ices of a car or furniture.

Fig.12

► 1. Corner nozzle 2. Cleaner body

8 ENGLISH

You can store the corner nozzle in the nozzle holder.

Fig.13

► 1. Nozzle holder 2. Corner nozzle

CAUTION:

Be careful not to trap finger(s)

between the corner nozzle and the nozzle holder.

Trapping finger(s) may cause injury.

Corner nozzle + Extension wand

(Straight pipe)

In tight quarters where the cleaner itself cannot

squeeze in, or in high places hard to reach, use this

arrangement.

Fig.14

► 1. Corner nozzle 2. Extension wand 3. Cleaner body

Cleaning without nozzle

With 250 mL dust case only

You can pick up powder and dust without nozzle.

Fig.15

Table of Contents