5.
Hold the mounting end of high performance filter
and squeeze it back into the cleaner body.
Fig.29
► 1. High performance filter 2. Cleaner body
HEPA filter
Optional accessory
NOTICE:
Do not rub or scratch the HEPA filter
with hard objects such as a brush and a paddle.
1.
Disassemble the cyclone unit from the cleaner
body.
2.
Hold the mounting end of HEPA filter (covered with
high performance prefilter) and pull it apart from the
cleaner body.
Fig.30
► 1. HEPA filter (covered with high performance prefil-
ter) 2. Cleaner body
3.
Disassemble the high performance prefilter from
the HEPA filter by hand twisting.
Fig.31
► 1. High performance prefilter 2. HEPA filter
1
2
1
2
1
2
4.
Wipe and shake dust off the high performance
prefilter and HEPA filter by hand.
Fig.32
5.
Wash the high performance prefilter and HEPA
filter in soapy water. Rinse and dry them thoroughly in
the shade before use.
Fig.33
NOTE: Avoid fastening the attachment end (rubber
sealing ring) of HEPA filter when hanging it up for
drying.
6.
Attach the high performance prefilter onto the
HEPA filter.
Fig.34
► 1. High performance prefilter 2. HEPA filter
12 ENGLISH
1
2