Makita CL003G Instruction Manual page 14

6. Place the sponge sheet back in the original
position. Make sure that the left and right edges of the
sponge sheet are secured with stoppers and no gap
between the sponge sheet and suction opening.
1
2
Fig.40
► 1. Sponge sheet 2. Stopper 3. Suction opening
7.
Hold the mounting end of filter and squeeze it
back into the cleaner body.
Fig.41
► 1. Filter 2. Cleaner body
3
1
2
14 ENGLISH
Condition-based maintenance
NOTICE:
Clean the mesh filter in the cyclone
unit when they become clogged. Continued use in
the clogged condition may result in heating or motor
malfunction.
Deep and spot cleaning needs to be carried out accord-
ing to your tool performance.
Mesh filter
Clean up the mesh filter placed in the cyclone unit when
no suggested improvement on suction performance has
been found after completing regular maintenance.
1. Hold the dust case firmly and pull it apart from the
cyclone body while pressing and holding the release
buttons on both sides of the dust case.
1
Fig.42
► 1. Dust case 2. Cyclone body 3. Release buttons
2. Turn the mesh filter as shown in the figure to dis-
engage the lock. Then detach it from the cyclone body.
1
Fig.43
► 1. Mesh filter
3
2