Makita CL003G Instruction Manual page 11

NOTE: Dust may fly out when the cyclone unit is
disassembled. It is recommended to place a garbage
bag underneath the cyclone unit.
3. Dust off inside the cyclone unit and filter.
Fig.24
4. Place the cyclone unit back onto the cleaner body,
aligning the pointer on the cyclone unit with that on the
cleaner body. Then turn the cyclone unit as shown in
the figure until it is secured in place.
1
Fig.25
► 1. Cyclone unit 2. Cleaner body 3. Pointers
High performance filter
Optional accessory
1.
2.
and pull it apart from the cleaner body.
Fig.26
► 1. High performance filter 2. Cleaner body
3.
3
2
Fig.27
4.
when it is clogged with dust and dirt. Dry it out thor-
oughly in the shade before use.
Fig.28
NOTE: Avoid fastening the attachment end (rubber sealing
ring) of high performance filter when hanging it up for drying.
11 ENGLISH
Disassemble the cyclone unit from the cleaner body.
Hold the mounting end of high performance filter
Wipe and shake dust off the high performance filter by hand.
Wash the high performance filter in soapy water
1
2