Makita UB002C Instruction Manual page 8

ASSEMBLY
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Assembling blower pipes
1. Loosen the clamp screw.
Fig.1
► 1 . Clamp screw
2. Install the control handle to the swivel pipe and
tighten the clamp screw.
1
Fig.2
► 1 . Control handle 2. Swivel pipe 3. Clamp screw
NOTICE:
Be careful not to twist the cable of the
control handle when attaching the control handle
to the swivel pipe.
1
2
3
3. Loosen the screw on the hose clamp, and then
attach the hose clamp to the flexible pipe. Attach the
swivel pipe to the flexible pipe, and then tighten the
screw on the hose clamp.
1
Fig.3
► 1 . Swivel pipe 2. Hose clamp 3. Flexible pipe
4. Loosen the screw on the hose clamp, and then
attach the hose clamp to the flexible pipe. Attach the
flexible pipe to the elbow, and then tighten the screw on
the hose clamp.
Fig.4
► 1 . Flexible pipe 2. Hose clamp 3. Elbow
8 ENGLISH
2
1 2 3
3