Makita UB001C Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Blower
  5. UB001C
  6. Instruction manual

Makita UB001C Instruction Manual

Battery powered blower
Hide thumbs Also See for UB001C:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Battery Powered Blower
UB001C
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita UB001C

Summary of Contents for Makita UB001C

  • Page 1 INSTRUCTION MANUAL Battery Powered Blower UB001C Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: UB001C Capacities Air volume 0 - 17.6 m /min Air speed (average) 0 - 58.0 m/s Air speed (max.) 0 - 70.0 m/s Overall length (with end nozzle) 960 mm / 1,010 mm / 1,060 mm Rated voltage D.C.

  • Page 3: Ec Declaration Of Conformity

    Instructions for appropriate conditions will reduce personal injuries. Inspect the cord before operating the machine. If the cord is damaged, ask Makita Authorized WARNING: Read all safety warnings and Service Centers for repair.
  • Page 4 Battery tool use and care restarting and operating the blower. If the Recharge only with the charger specified by blower is damaged, ask Makita Authorized the manufacturer. A charger that is suitable for Service Centers for repair. one type of battery pack may create a risk of fire 16.
  • Page 5 It will Do not short the battery cartridge: also void the Makita warranty for the Makita tool and Do not touch the terminals with any con- charger.
  • Page 6 Installing the end nozzle Installing the flat nozzle or extension nozzle Align the triangle mark on the end nozzle with the trian- gle mark on the front pipe, then attach the end nozzle Optional accessory to the front pipe, and then turn the end nozzle to lock it Align the groove on the adapter pipe with the pro- into place.
  • Page 7 Place the hose clamps onto the grooves as illus- Installing the gutter nozzle set trated and tighten the screws. Optional accessory Align the groove on the adapter pipe with the pro- trusion on the front pipe, then attach the adapter pipe to the front pipe, and then turn it to lock it into place.

  • Page 8: Functional Description

    Connect the end nozzle to the extension pipe. FUNCTIONAL DESCRIPTION When connecting, align the triangle marking on the end nozzle and the extension pipe, and then push the end nozzle until it clicks. After that, rotate the end nozzle to CAUTION: Always be sure that the machine a suitable position for your work.
  • Page 9 You can use the machine in the Boost mode. In the NOTE: This machine employs the auto power-off Boost mode, the air volume becomes larger than in the function. To avoid unintentional start up, the main normal mode. To use the machine in the Boost mode, power switch will automatically shut down when the pull the switch trigger until the switch trigger stops in the switch trigger is not pulled for a certain period after...

  • Page 10: Operation

    Makita. If you put on the shoulder harness not recommended by Makita and the shoulder harness of the back- pack-type power supply at the same time, removing the machine or backpack-type power supply is dif- ficult in case of an emergency, and it may cause an accident or injury.
  • Page 11 For PDC01 Press the power button on the portable power pack. The main power lamp will light up. When pulling out the cord, be sure to set the cord in the holders as shown in the figure. For PDC1200 ► 1. Cord 2. Holder ►...
  • Page 12 Attach the shoulder harness to the machine using Press the main power switch to turn on the machine. the hook on the hanging band. Be sure to hook on the The machine is ready to operate. The machine will run hanger of the machine.

  • Page 13: Blower Operation

    Blower operation CAUTION: Do not place the machine on the ground while it is switched on. Sand or dust may enter from suction inlet and cause a malfunction or personal injury. Hold the machine firmly with a hand and perform the blowing operation by moving it around slowly.
  • Page 14 NOTE: When unlocking the buckle, press the claws of the buckle on both sides. When locking the buckle, insert the claws until they are locked. ► 1. Claw CAUTION: Do not use the gutter nozzle set on windy day. Using the gutter nozzle set CAUTION: When using the gutter nozzle set, do not use the machine in the Boost mode.

  • Page 15: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the machine ► 1. Hole Clean the machine by wiping off dust with a dry cloth or one dipped in soapy water and wrung out.

  • Page 16: Troubleshooting

    Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man- ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.
  • Page 20 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885801-221 www.makita.com 20200728...

Table of Contents