Https - Honeywell PERFORMANCE LITE 2MP SD User Manual

SMTP Port: The SMTP port.
Send Interval(S): The time interval of sending email. For example, if it is set to 60 seconds and multiple motion detection alarms
are triggered within 60 seconds, they will be considered as only one alarm event and only one email will be sent. If one motion
alarm event is triggered and then another motion detection alarm event is triggered after 60 seconds, two emails will be sent.
When different alarms are triggered at the same time, multiple emails will be sent separately.
Click the "Test" button to test the connection of the account.
Recipient Address: receiver's e-mail address.

HTTPS

HTTPs provides authentication of the web site and protects user privacy.
Go to Config > Network > HTTPS as shown below.
There is a certificate installed by default as shown above. Enable this function and save it. Then the camera can be accessed by
entering https://IP: https port via the web browser (eg. https://192.168.226.201:443).
A private certificate can be created if users don't want to use the default one. Click "Delete" to cancel the default certificate. Then
the following interface will be displayed.
* If there is a signed certificate, click "Browse" to select it and then click "Install" to install it.
* Click "Create a private certificate" to enter the following creation interface.
26 Performance Lite 2MP SD Camera - User Manual | Configuration