Other Alarms - Honeywell PERFORMANCE LITE 2MP SD User Manual

Other Alarms

• SD Card Full
1. Go to Config > Alarm > Anomaly > SD Card Full.
2. Click "Enable" and set the alarm holding time.
3. Tick "Trigger Email".
4. Click "Save" to save the settings.
• SD Card Error
When there are some errors in writing SD card, the corresponding alarms will be triggered.
1. Go to Config > Alarm > Anomaly > SD Card Error as shown below.
2. Click "Enable" and set the alarm holding time.
3. Tick "Trigger Email".
4. Click "Save" to save the settings.
Note: SD card full and SD card error are only available for the models with SD card slot.
18 Performance Lite 2MP SD Camera - User Manual | Configuration