Server Configuration; Ddns Configuration - Honeywell PERFORMANCE LITE 2MP SD User Manual

Server Configuration

This function is mainly used for connecting network video management system.
1. Check "Enable".
2. Check the IP address and auto report port of the transfer media server in the ECMS/NVMS. Then enable the auto report in the
ECMS/NVMS when adding a new device. Next, input the remaining information of the device in the ECMS/NVMS. After that, the
system will auto allot a device ID. Please check it in the ECMS/NVMS.
3. Input the above-mentioned server address, server port and device ID in the responding boxes. Click "Save" button to save the
settings.

DDNS Configuration

If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config > Network > DDNS.
Performance Lite 2MP SD Camera - User Manual | Configuration 21