Video Mask - Honeywell PERFORMANCE LITE 2MP SD User Manual

Video Mask

Go to Config > Image > Video Mask menu to display the interface as shown below. A maximum of 4 zones can be set up.
To set up video mask
1. Enable video mask.
2. Click the "Draw Area" button and then drag the mouse to draw the video mask area.
3. Click the "Save" button to save the settings.
4. Return to the live to verify that the area have been drawn as shown as blocked out in the image.
To clear the video mask:
Click the "Clear" button to delete the current video mask area.
Performance Lite 2MP SD Camera - User Manual | Configuration 15