Upnp; Mail Configuration - Honeywell PERFORMANCE LITE 2MP SD User Manual

UPNP

If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config > Network > UPnP. Enable UPnP and then enter UPnP name.

Mail configuration

If you need to trigger Email when an alarm happens or IP address is changed, please set the Email here first.
Go to Config > Network > Email.
Sender Address: sender's e-mail address.
User name and password: sender's user name and password.
Server Address: The SMTP IP address or host name.
Select the secure connection type at the "Secure Connection" pull-down list according to what's required.
Performance Lite 2MP SD Camera - User Manual | Configuration 25