Osd Configuration - Honeywell PERFORMANCE LITE 2MP SD User Manual

Two video streams can be adjustable.
Resolution: The size of image.
Frame rate: The higher the frame rate, the smoother is the video.
Bitrate type: CBR and VBR are optional. Bitrate is related to image quality. CBR means that no matter how much change is
seen in the video scene, the compression bitrate will be kept constant. VBR means that the compression bitrate will be adjusted
according to scene changes. For example, for scenes that do not have much movement, the bitrate will be kept at a lower value.
This can help optimize the network bandwidth usage.
Bitrate: it can be adjusted when the mode is set to CBR. The higher the bitrate, the better the image quality will be.
Video Quality: It can be adjusted when the mode is set to VBR. The higher the image quality, the more bitrate will be required.
I Frame interval: It determines how many frames are allowed between a "group of pictures". When a new scene begins in a
video, until that scene ends, the entire group of frames (or pictures) can be considered as a group of pictures. If there is not
much movement in the scene, setting the value higher than the frame rate is fine, potentially resulting in less bandwidth usage.
However, if the value is set too high, and there is a high frequency of movement in the video, there is a risk of frame skipping.
Video Compression: H264/H265/MJPEG can be selected.
Profile: For H.264. Baseline, main and high profiles are selectable.
Send Snapshot: How many snapshots to generate for an event.
Video encode slice split: If this function is enabled, smooth image can be gotten even though using the low-performance PC.
Watermark: When playing back the local recorded video in the search interface, the watermark can be displayed. To enable it,
check the watermark box and enter the watermark text.

OSD Configuration

Go to Config > Image > OSD menu to display the interface as shown below:
Time stamp, device name and OSD can be set up here. After enabling the corresponding display and entering the content, drag
them to change their position. Then press the "Save" button to save the settings.
14 Performance Lite 2MP SD Camera - User Manual | Configuration