Access Through Static Ip - Honeywell PERFORMANCE LITE 2MP SD User Manual

3. Go to the router's management interface through IE browser to forward the IP address and port of the camera in the "Virtual
Server".
4. Open the IE browser and input its WAN IP and http port to access.

Access through static IP

Network connection
or
IPC
The setup steps are as follow:
1. Go to Config > Network > Port menu to set the port number.
2. Go to Config > Network > TCP/IP menu to set the IP address. Check "Use the following IP address" and then enter the static IP
address and other parameters.
3. Open the IE browser and enter its WAN IP and http port to access.
Router Setup
Internet
Network Cable
Performance Lite 2MP SD Camera - User Manual |
Network Cable
Computer
Network Connection 7