Electrical Specifications; Mechanical And Environmental Specifications; Battery Notifications - Honeywell SRX2 User Manual

Electrical Specifications

l
l
l
l

Mechanical and Environmental Specifications

l
l

Battery Notifications

The battery triggers two warnings based on remaining runtime:
Battery Condition
When battery voltage is low
When battery voltage is critically low and about
to turn off
SRX3 User Guide - Preliminary
Cells: The battery pack uses a single lithium ion cell.
l
l
Protection circuit characteristics: The pack contains a protection circuit that
prevents over and under voltage conditions on the cell and protects the
pack from damage as a result of a short circuit between the positive and
negative terminals of the battery.
The battery pack contains custom electronics that provide performance,
temperature, and pack identification to the device. This information is made
available to voice management software.
Battery Charging: The battery pack must be charged only in a Honeywell
designated charger.
Drop-test specifications: The battery meets the transient drop criteria.
o
o
Environmental specifications: The battery functions properly in the following
conditions:
o
o
o
Nominal voltage = 3.6V
Watt hours = 2.7 WHr
24 drops at 6 feet (182.88 cm)
12 drops at 7 feet (213.36 cm)
Temperature: -22 °F to 122 °F (-30 °C to 50 °C)
Humidity: 95% non-condensing
Rain/dust: IP54
Audio Warning
"Headset battery is getting low."
"Headset battery is getting low. Change headset
battery now."
68