Cleaning Headsets; Cleaning The Headband Pad - Honeywell SRX2 User Manual

Cleaning Headsets

The foam pads used with Vocollect headsets were designed for both comfort
and hygiene. The materials naturally inhibit the growth of bacteria and can be
cleaned by rinsing with water and drying.
NOTE
Commercial cleaning solvents are not recommended.
l
l
l
l
l

Cleaning the Headband Pad

NOTE
Honeywell strongly recommends that you leave the headband pad in place when
cleaning it. If you must remove the entire pad to clean it, use care to line up the head-
band pad with the topmost part of the headband when you place it back on the head-
band.
l
SRX3 User Guide - Preliminary
Clean the plastic parts of the headsets with a soft cloth dampened with
water. To clean and disinfect the headset plastic, use a pre-moistened
alcohol wipe.
If the Talkman Connectors or plugs become contaminated, use a pre-
moistened alcohol wipe to remove dirt or residue.
If the metal connection points on the Talkman's Connectors become
discolored, use a soft pencil eraser to clean them.
Do not use unapproved liquids to clean the yellow, blue, and red Talkman
Connectors (TCOs) and any associated headset, scanner, or device plugs.
Hand or machine wash dual-cupped headset earpad covers in cold or warm
water, then air dry the covers. The covers are made of 100% cotton flannel
and may shrink if dried in a clothes dryer.
Leave the headband in place and simply wipe the headband with a soft cloth.
If necessary, use a pre-moistened alcohol wipe to clean and disinfect the
unit.
52