Handheld Device Pairing Status Icons - Honeywell SRX2 User Manual

Prerequisites:
l
l
l
l
1. Turn on the headset. The headset starts up in low power pairing mode.
2. Initiate the pairing inquiry from the master device by pressing or clicking
3. Hold the headset and wireless device so they are within six inches of each
4. Select the ID number of the headset you want to use from the list on the
5. Tap, click, or press the appropriate button on the screen or device to create
6. Press the Play/Pause button to begin working.

Handheld Device Pairing Status Icons

When using the Vocollect Voice or Voice MP application on a handheld wireless
device, an icon in the upper right hand corner of the screen indicates the
pairing status. Vocollect Voice on a PC displays similar browser-based
notifications, but the icons are different.
Icon Status
A wireless headset is not paired to the device
The device is searching for a headset
43
The headset is powered off.
The handheld device is not in a charger, and there is no wired headset
connected to it.
The device is in sleep mode — not in use running an application.
The device is Bluetooth ready with Bluetooth connection features enabled.
NOTE
Some handheld devices may require the headset to be in high power
pairing mode in order to be discovered in the device's pairing inquiry.
To change to high power pairing mode, press and release the Plus (+)
and Minus (-) buttons on the headset while it is in low power pairing
mode.
the appropriate button on the screen or device.
other but not touching.
screen.
the pairing.
The device briefly displays that the device attempts to
connect to the headset . Once the headset connects, three
tones play in the headset, the SRX Headset Status displays
as Connected. The pairing confirmation step is skipped
because the pairing was specified by the user.
SRX3 User Guide - Preliminary