Honeywell SRX2 User Manual page 44

manually as it will, by default, clear a pairing when powered off or when placed
into the charger.
Recommended for:
l
l
Why?
When sharing headsets, autopairing makes it easy to locate any device and
headset, power the two on in close proximity to one another (less than 3 feet),
and have the two pair automatically. It eliminates the need to clear pairings
manually or through VoiceConsole as it will clear a pairing when powered off or
when placed into the charger by default. When you start up the device, it will be
unpaired and will begin searching for a headset. .
Manual pairing
The user determines when to pair a device and headset by pressing buttons on
the device.
Recommended for:
l
l
l
Why?
VoiceClient users that are not sharing their headsets with other users are
encouraged to use manual pairing. Manual pairing is the safest way to avoid
cross pairing, as the user is performing the pairing procedure away from other
users. Also, once a manual pairing is made (assuming no other configuration
parameters have been changed), the pairing will persist and that device and
headset will stay paired until the pairing is explicitly cleared.
VoiceConsole pairing
The user pairs a specific device to a headset via the VoiceConsole interface.
SRX3 User Guide - Preliminary
NOTE
The SRX2 and SRX3 headset always powers up in pairing mode.
VoiceClient users sharing headsets
Anyone using SRX2/SRX2 headsets
NOTE
The SRX2 or SRX3 headset can perform either manual or auto pairing for
its first pairing.
VoiceCatalyst users on A500 devices
VoiceClient users not sharing headsets
Anyone using SRX3 headsets
38