Preferences Page - GE IDP-1111 User Manual

Gateway. Enter the address of the gateway between the dome and the network server. This is assigned by
your network administrator.
MAC address. Provided as a unique hardware address for the dome, the MAC address allows you to
connect to the dome before you have set up its network addressing. The MAC address is assigned at
the factory. The installer establishes the overriding IP address during installation. See the above IP
address item.

Preferences page

The Preferences page establishes the systemwide features of language and the display of the camera's spatial
coordinates.
Display page
To access the Display page, select Setup, Preferences, and Display.
Figure 17. Display page
Note: Remember to select OK to save any changes you make on the page.
Language. The Language feature sets which language the programming interface uses to display its
content and your entries. Choice is English.
Branding. The Branding feature displays GE branding during product demonstrations. Choices are Off
(default) and On.
Temperature display. The Temperature display feature sets which unit is used to display the current
operating temperature for the dome on the monitor screen. Choices are Off (default), Celsius, and
Fahrenheit. If Off is selected while the high and low thresholds are being used and are exceeded, the
Off selection will default to Celsius.
High temp warning. The High temp warning feature allows you to display a high-temperature reading on
the monitor screen when the temperature in the dome has reached a set high threshold. Place a
Chapter 5
Advanced programming
27