Product Overview - GE IDP-1111 User Manual

2 Legend
User Manual

Product overview

Legend™ is a line of advanced PTZ domes. Besides powerful cameras, Legend domes feature SilkTrak™
direct-drive positioning for smoother camera travel, a graphical programming interface (Figure 1) for easier
customization of camera settings, passcodes for protection against unauthorized access, and an Ethernet
connection for flashing software upgrades over a standard IP network using a standard web browser.
CAUTION:
The Legend protocol is backward compatible with the Digiplex protocol. You can replace older domes in an
existing Digiplex system with Legend domes. You must, however, replace the entire dome (camera and
housing). The hardware is not backward compatible.
The end-user's system administrator and/or the installer will do the programming. Be aware that the installer
may have enabled passcodes for the system during installation by specifying them. There are no passcodes by
default.
For additional details, refer to the data sheet and the Legend Installation Manual (1052026) for product
specifications and installation instructions.
Figure 1. Main menu of the graphical programming interface
When flashing software upgrades to the dome over a standard IP network via the dome's Ethernet
connection, ensure that the network is secured from unauthorized access. Consider connecting the
Ethernet cable only when you are flashing the dome, unless you have the dome connected to a secure,
isolated network.