Playing A Tape; Tape - Recording; Recording Your Favorite Cd/Md Tracks On A Tape; Cd/Md-Tape Synchro Recording - Sony CMT-M333NT Operating Instructions Manual

Playing a tape

You can use TYPE I (normal) tape.
1
Press FUNCTION repeatedly to switch
the function to TAPE.
2
Press DIRECTION on the unit
repeatedly to select "g" to play one
side of a tape, "h" to play both sides,
or "j"
repeatedly.
* The tape deck stops automatically after
repeating the sequence five times.
3
Press TAPE nN.
Press TAPE nN again to play the
reverse side.
Other operations
To
Stop play
Pause
Fast-forward or
rewind
Remove a tape
GB
40
*
to play both sides
Do this
Press x.
Press X TAPE on the unit. Press
again to resume play.
m
Press or M.
Press Z PUSH OPEN/CLOSE.
Tape – Recording
Recording your favorite
CD/MD tracks on a tape

— CD/MD-TAPE Synchro Recording

You can record a whole CD or MD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Load a CD or MD you want to record.
3
Press SYNCHRO MODE repeatedly
until "CDtTAPE SYNC" or
"MDtTAPE SYNC" appears.
4
Press ENTER/START.
"Press START" flashes. The tape deck
stands by for recording and the CD player
or MD deck pauses for play.
5
Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
6
Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN to light
up the N indicator. If you record on the
reverse side, press TAPE nN again to
light up the n indicator.
7
Press ENTER/START while "Press
START" flashes.
Recording starts.
When the recording is completed, the CD
player or MD deck, and the tape deck stop
automatically.
To stop recording
Press x.
Recording on an MD and a tape at
the same time
Insert a recordable MD, then select "DUAL
SYNC" in step 3. Even if the MD or the tape
ends part-way through the recording, the other
continues recording.