Recording A Cd On An Md; Cd-Md Synchro Recording/High-Speed Cd-Md Synchro Recording; After Recording - Sony CMT-M333NT Operating Instructions Manual

Micro hi fi component system
Hide thumbs Also See for CMT-M333NT:
Table of Contents

Advertisement

After recording

Press Z MD on the unit to remove the MD
or press ?/1 (power) to turn off the system.
"TOC writing" or "STANDBY" starts flashing.
The TOC is updated and recording is completed.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press
turn off the system. Do not pull out the mains
lead before updating the TOC or while updating
the TOC (while "TOC" lights up or flashes) to
ensure a complete recording.
Protecting a recorded MD
• To protect a recorded MD, slide the tab on the
side of the MD to open the slot. In this
position, the MD cannot be recorded. To
record on the MD, slide the tab to close the
slot.
Tab
Slide the tab
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD
cannot be recorded. Remove the MD, then
slide the record protection tab to the closed
position.

Recording a CD on an MD

— CD-MD Synchro Recording/High-
Speed CD-MD Synchro Recording
You can record a whole CD on an MD. You can
select the recording time by switching the
recording mode.
In addition to recording at normal speed, you
can also record at high speed (approximately 4
?/1
to
normal speed).
Use buttons on the unit for the operation.
1
Load a recordable MD.
2
Load a CD you want to record.
3
Press REC MODE repeatedly to select
the recording mode.
Select the desired recording time.
Recording time
Standard
Double
Quadruple
Double
(change the stereo
signal to monaural)
4
Press SYNCHRO MODE repeatedly
until "CDtMD SYNC" appears.
To record using High-Speed CD-MD
Synchro Recording, press the button until
"HISPEED SYNC" appears.
5
Press ENTER/START.
"Press START" flashes.
The MD deck stands by for recording and
the CD player pauses for play.
6
Press ENTER/START while "Press
START" flashes.
Recording starts.
When the recording is completed, the CD
player and the MD deck stop automatically.
Select
(Recording mode)
no indication (stereo)
LP2 (LP2 stereo)
LP4 (LP4 stereo)
MONO (monaural)
L-SYNC
SYNC
REC
MD
CD
NORM
continued
GB
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmt-m373nt

Table of Contents