Safety; General Safety - AEG AS-BSL1-8000 Series Manual

Icon Meaning
For proper use read the installation
manual
CE marking. The product complies with
the CE directives
EU WEEE mark. Do not dispose of
product as household waste.
Explanation of icons on storage unit label
Battery Pack:
Each battery pack can be identified by means of the
following information:
Serial Number
Each battery pack is identified by a unique serial
number univocally coupled with a barcode, to be found
on the housing.
Product Label
The product label of the battery pack is placed on
the housing. It provides information about the main
parameters of the device such as: Product Name
Code (PNC), Battery Type, Capacity, Nominal Voltage
and Nominal Energy, Charge, and further operation
parameters.
AEG
is a registered trademark
used under license
from AB Electrolux (publ).
Product Name Code
Battery type
Capacity
Nominal voltage
Nominal energy
Charge/discharge current (nominal)
Operating temperature range
Protection class
+ _
Battery pack label example
Icon Meaning
Safety warning: electrical hazard
Electrolytes leak danger
+ _
Risk of explosion
Heavy, handle with care to avoid injury
AEG LOW VOLTAGE ENERGY STORAGE UNIT (8 KWH / 12 KWH) INSTALLATION MANUAL
Solar Solutions GmbH
Brückenstrasse 94 60594 Frankfurt am Main Germany
+49 69 800 500 810 info@aeg-industrialsolar.de
www.aeg-industrialsolar.de Product assembled in the P.R.C.
AS-BBL1-4000
Lithium (LFP)
75Ah
51.2V
3.84kWh
0.25C / 0.5C
-10 ~ 45°C
IP20
+ _
Icon Meaning
Keep away from fire or ignition sources
Keep away from children
+ _
Ensure correct polarity connection
For proper use read the installation manual
Suitable for recycling through a professional
battery recycling company
CE marking. The product complies with the
CE directives
EU WEEE mark. Do not dispose of product
as household waste.
Explanation of icons on battery pack label
Please refer to the specific product datasheet on
www.aeg-industrialsolar.de for the latest technical data.

2. SAFETY

2.1 General safety

All AEG energy storage units are tested according to
international safety regulations.
AEG energy storage units should be installed,
maintained, connected and operated by qualified
technicians in compliance with all local and national
applicable standards, codes and regulations issued
by the relevant power suppliers, companies and
authorities. Installers bear the risk of all injury that
might occur during installation including, without
limitation, the risk of electric shock. Check and follow
all safety precautions specified even for the other
components of the system. Keep children away
from the installation site and during transportation,
installation and maintenance of the electrical
equipment.
2.2 Handling safety
Please observe the following indications when
handling the AEG energy storage unit (AS-BSL1-8000
or AS-BSL1-12000) and the AEG battery pack (AS-
BBL1-4000).
4
EN PD202107 V1-21