Checking And Adjusting System Settings In The Settings Menu; Selecting The Power Source; Setting The Charging / Feed-In Intervals And Speed - AEG AS-BSL1-8000 Series Manual

Low voltage energy storage unit
Table of Contents

Advertisement

5.3.4 Checking and adjusting system settings in the
Settings menu
The „Settings" menu allows you to
adjust the settings of the AEG energy
storage system.
Selecting the power source; setting the charging /
feed-in intervals and speed
The „Power Sources" sub-menu
allow you to select the power source.
If you wish to only charge the battery
from the PV plant, select
„Power Source: PV system".
If you want the storage system to rely both on the grid
and the PV plant to charge the battery, select „Power
source: PV system and grid power".
AEG LOW VOLTAGE ENERGY STORAGE UNIT (8 KWH / 12 KWH) INSTALLATION MANUAL
If „Power source: PV system" is selected, nothing else
needs to be adjusted. If „Power source: PV system & grid
power" is selected, the „Grid charging settings" and the
„Charging speed settings" have to be adjusted. In the „Grid
charging settings" you can set the intervals at which the
the battery needs to be charged using the grid.
will
The speed of charging can also be adjusted. The initial
default charging speed is „Regular/economy mode
(20A)". Low current charging is instrumental to extend
the battery life; „Super charging mode" is only for
occasional use.
Power source mode
EN
PD202107 V1-21
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-bsl1-12000 seriesAs-bbl1-4000

Table of Contents