Choosing How To Use Stored Energy; Setting Language And Time; Checking Product Information - AEG AS-BSL1-8000 Series Manual

Choosing how to use stored energy

The „Energy Utilization" sub-menu
will allow you to select the use of the
stored energy.
If you do not wish that the battery feeds back energy
to the grid, select „Use of energy for house load only"
Nothing else has to be adjusted then..
The section „Feed-in times" allows you to adjust the
intervals at which you wish to discharge the battery by
feeding the energy to the grid.
If the generated energy should be used for house load
and grid feed-in, please select „Use of energy for house
load & grid feed-in". The time intervalls for this have
then to be adjusted.
AEG LOW VOLTAGE ENERGY STORAGE UNIT (8 KWH / 12 KWH) INSTALLATION MANUAL

Setting language and time

The sub-menu „Language Settings" allows you to
choose the system languages from a set of given
languages (default: English).
The sub-menu „Time and date" allows you to set a
different time and date than the default one. Please
make sure to set the local time and date immediately
after installation, as other parameters (such as charging
time, discharging time etc) depend on them..

Checking product information

In the section „Product information" you can find
specific system information such as system PNC
(Product Name Code) and version, inverter and battery
pack version.
24
EN PD202107 V1-21