Normal Condition; Interface Description - Honeywell NOTIFIER LCD6000T Programming And Installation Manual

U S E R I N T E R F A
U S E R I N T E R F A
N.B.
LCD-6000T is a panel for the management of installed Technological devices having 4-20mA (MMT or
IIG4-N) interface.
The technologica l point programming must be perf ormed on the control unit ( refer t o c hapter
Programming of MMT and IIG4-Ntechnological devices contained in this manual).

Normal condition

The following is displayed when there are no anomaly conditions (alarms or breakdowns) on the LCD6000T
panel:
Icon to signal the Panel state.
In the state of alarm and breakdown absence there is the symbol of NOTIFIER mark.
In the presence of excluded points or zones an exclamation point is displayed( ! ).
In the presence of pre-alarms or alarms there is the symbol
In the presence of breakdowns there is the Triangle symbol
N.B. The alarm state prevails if alarms and breakdowns are simultaneously present on the panel.
Date - Hour
PAGE - 6
NOTIFIER ITALIA
C E D E S C R I P T I O
C E D E S C R I P T I O
State of the RS485 serial connection
In case of anomaly on the serial connection
there is the "OFF LINE" signaling
Installation manual
Doc. M-184.1-LCD6000T-ENG Rev A.2
N
N
.
Icon to signal the state of the serial
connection
In case of anomaly on the serial
connection the following state
icon is displayed:
Alarm zone
counter
Breakdown
zone counter
System breakdown
counter
Excluded zone
counter
LCD6000
LCD6000_manu