Local Programming - Honeywell NOTIFIER LCD6000T Programming And Installation Manual

TEST
From the Main Menu through the arrow keys  select the item "TEST" and press the key
to access the display menu of the test zone devices.
The following menu is displayed:
To display the lists of the devices under Test (Sensors or Zones) select through the arrow keys  the
required item, press the key

LOCAL PROGRAMMING

Press the key from the state window and subsequently through the arrow keysselect the item
"Local Prog" and
press the key to access the programming menu, where the user can perform the initial configuration of
the LCD-6000T panel and make possible changes
The following menu is displayed :
PAGE - 12
NOTIFIER ITALIA
to confirm the selection.
Installation manual
Doc. M-184.1-LCD6000T-ENG Rev A.2
Number counter of devices under test
Number Counter of zone under test
Use the arrow keys  to
select the function to be
changed and press the Lists
key to confirm and
access the function
LCD6000
LCD6000_manu