General Description; Operation; Technical Specifications - Honeywell NOTIFIER LCD6000T Programming And Installation Manual

This device must be installed and must operate in accordance with these instructions and
with the rules in force in the installation place.

GENERAL DESCRIPTION

DESCRIPTION
LCD-6000T is a panel for the management of gas detection devices or T echnological devices having
a 4-20mA interface which are installed in AM-2000; AM-4000; AM-6000 control units.
Up to 16 LCD-6000T can be connected to a single control unit as a terminal function.
The LCD-6000T panel indicates all signallings coming from the 4-200 mA interface modules and allows to
perform the following functions :

EVENT RECOGNITION.

ALARM RESET.

DISPLAY OF EXCLUDED POINTS AND ZONES

DISPLAY OF ZONES AND POINTS UNDER TEST
PANEL
AM-2000N
AM-4000
AM-4000G
AM-6000N

OPERATION

It needs the local programming to assign the peripheral address
The LCD-6000T panel displays time, date and personalized messages coming from AM series control
units.
On each LCD-6000T control panel, can be independently performed the functions relevant to the keys:
- Buzzer Silencing and Alarm Reset.
- Moreover, it allows to display the event lists subdivided into:
- Alarms, breakdowns, System breakdowns.

Technical specifications:


Microprocessor system

LCD display 320 x 240 points

Keyboard with keys dedicated to specific functions: Buzzer Silencing, Reset.
Serial lines :

- 1 RS 485 interface
 Power supply
10 ÷ 30Vcc
 Connections
- 2 power supply cables
- 3 cables for serial connection
 Mechanical features:
The LDC6000 panel mechanical features are suitable for wall installations.
Sizes 180mm (L) x 168mm (H) x 55mm (P)
Protection grade : IP 20
Operation temperature : from -5 °C to +40 °C
PAGE - 2
NOTIFIER ITALIA
LCD-6000-N
LCD-6000-T
max 12
max 16
max 16 LCD-6000-T
max 16
Installation manual
Doc. M-184.1-LCD6000T-ENG Rev A.2
Max numbers LCD
LCD-6000A
installable
max 10
max 14
NO
max 16
16
22
16
24
LCD6000
LCD6000_manu