Table of Contents
Advertisement
DEFAULT NORMAL MESSAGE IS USED
REPEATER DISPLAYS ARE IN SELECTED
LANGUAGE
IDR-2P, -2A & -6A Repeaters User Manual
4.3.4 Edit NORMAL Message (-2A)
4.3.5 Restore NORMAL Message (-2A)
4.3.6 Language (-2A)
23
This option lets you change the message that
is displayed on the lower line of the LCD when
the system status is normal.
1 Use the
and
pushbuttons to select
the character to be edited - it blinks. Use
the
and
pushbuttons to scroll through
the available character set until the required
replacement character is displayed. Select
the next character to be edited, and so on.
2 When all edits are complete, press
exit from the message editor.
Note: To exit from the message editor without
saving changes, do not press
Instead, turn the keyswitch to return to
access level 1.
To use the repeater's default message instead
of the message edited at the repeater, select
this menu option and press
Use the
and
pushbuttons to scroll
through the available languages. Press
select the language currently-displayed.
997-411-000-9, Issue 9
to
.
.
to
March 2008
Hide quick links:
Advertisement
Table of Contents
