Makita M5802 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
(2) Remove M5 Pan head screw on Angular plate side as shown in Fig. 3.
Angular plate
Angular plate side
1. Fixing M5 Hex nut with Wrench 8,
unscrew M5 Pan head screw.
Screwdriver
M5 Pan head
screw
Angular plate
3. Now, Base section is free from the machine both on Depth guide side and Angular plate side in this step.
(3) Base section is removed from the machine, as shown in Fig. 4.
Blade case
M5 Hex nut
Depth guide
Depth guide side
Fig.3
M5 Pan head
screw
Wrench 8
Fig.4
Base section
2. Remove M5 Pan head screw and
M5 Hex nut, while paying attention
not to lose Spring washer 5.
Spring washer 5
M5 Hex nut
P 4 / 12