Makita DCL181F Instruction Manual page 7

2. Remove accumulated dust from inside of capsule
and off of prefilter.
1
► 1. Prefilter 2. Capsule
3.
Twist prefilter in direction of arrow to unfasten
securing lip from cleaner unit and then pull off prefilter.
1
► 1. Prefilter 2. Securing lip
4. Clean out fine dust from prefilter. Next, remove
filter, and lightly tap to dislodge dust.
1
► 1. Prefilter 2. Filter
2
2
2
7 ENGLISH
Disposing of dust for high
performance filter
1. In order to drop dust sticking on the filter in the
capsule, tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
► 1. Capsule 2. Suction inlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
2.
Remove accumulated dust from inside of capsule
and off of high performance filter.
► 1. Capsule 2. High performance filter
3. Twist high performance filter in direction of arrow to unfas-
ten securing lip from cleaner unit and then pull off the filter.
► 1. Securing lip
4. Clean out the fine dust and lightly tap to dislodge
dust from high performance filter.
1
2
1
2
1