Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DCL181FZW
Summary of Contents for Makita DCL181FZW
- Page 1 INSTRUCTION MANUAL Cordless Cleaner DCL181F Read before use.
-
Page 2: Specifications
WARNING This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa- bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. - Page 3 Do not bring close to stoves or other heat also void the Makita warranty for the Makita tool and sources. charger. Do not block the intake hole or vent holes.
-
Page 4: Functional Description
Tips for maintaining maximum battery life Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Never recharge a fully charged battery car- tridge. Overcharging shortens the battery service life. - Page 5 Overloaded: Switch action The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on to restart. If the tool does not start, the battery is overheated.
- Page 6 Disposing of dust for normal filter ASSEMBLY In order to drop dust sticking on the filter in the capsule, tap the capsule 4 or 5 times with your hand. CAUTION: Always be sure that the tool is Now point suction inlet downwards, turn capsule in switched off and the battery cartridge is removed direction of arrow in diagram, and disconnect capsule before carrying out any work on the tool.
- Page 7 Clean out fine dust from prefilter. Next, remove Twist high performance filter in direction of arrow filter, and lightly tap to dislodge dust. to unfasten securing lip from cleaner unit and then pull off the filter. ► 1 . Prefilter 2. Filter ► 1 . Securing lip Disposing of dust for high Clean out the fine dust and lightly tap to dislodge performance filter dust from high performance filter. Reassembly In order to drop dust sticking on the filter in the capsule, tap the capsule 4 or 5 times with your hand. Now point suction inlet downwards, turn capsule in Reassembly for normal filter direction of arrow in diagram, and disconnect capsule...
- Page 8 Connect prefilter. At this time, make sure to twist prefilter so that securing lip is firmly locked into cleaner unit. ► 1 . Handle 2. Capsule NOTE: Always remove dust ahead of time, as suction power will be reduced if there is too much dust in ► 1 . Prefilter cleaner. NOTE: Always be sure to check that both filter and prefilter are loaded correctly prior to using cleaner. If they are not loaded correctly, dust will get into the motor housing, and cause motor failure.
- Page 9 Example 3: Filter has been loaded in a peeled back state ► 1 . Securing lip Connect capsule. Align O mark on capsule with O ► 1 . Filter mark on handle and then firmly twist capsule in direction of arrow until it is secured. Example 4: Prefilter's securing lip is not firmly locked into groove of cleaner housing ► 1 .
-
Page 10: Operation
Problem Examples Cleaning (Suction) Securing lip of high performance filter is not firmly locked into groove of cleaner housing. Nozzle Attach the nozzle to clean off tables, desks, furniture, etc. The nozzle slips on easily. ► 1 . Securing lip 2. Groove of cleaner housing ► 1 . Nozzle OPERATION Nozzle + Extension wand (Straight pipe) CAUTION:... -
Page 11: Maintenance
Corner nozzle +Extension wand After use (Straight pipe) NOTICE: Putting the cleaner against the wall In tight quarters where the cleaner itself cannot without any other support cause the cleaner to squeeze in, or in high places hard to reach, use this fall down and be damaged. - Page 12 Filter Wall mount for cordless cleaner Wash the filter in soapy water when it is clogged with Optional accessory dust and the cleaner power becomes weak. Dry it out thoroughly before use. NOTE: The screw to mount the holder is not included. Prepare a screw which fits with the material to screw into. Attach the wall mount for cordless cleaner to a hard wooden wall, beam or column, where the wall mount for cordless cleaner can be firmly secured. Always be sure that the wall mount for cordless cleaner is securely...
-
Page 13: Troubleshooting
Is the battery cartridge exhausted ? Charge the battery cartridge. CAUTION: Do not attempt to repair the cleaner by yourself. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885580B221 www.makita.com 20171109...