Maintenance - Makita DCL181F Instruction Manual

Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor in a standing position.
► 1. Cleaner body 2. Extension wand 3. Nozzle
Corner nozzle
Fit on the corner nozzle for cleaning corners and crev-
ices of a car or furniture.
► 1. Corner nozzle 2. Cleaner body
Corner nozzle +Extension wand
(Straight pipe)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
► 1. Corner nozzle 2. Extension wand 3. Cleaner body
1
2 3
1 2
2
1
Cleaning without nozzle
You can pick up powder and dust without nozzle.

MAINTENANCE

CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
After use
NOTICE:
without any other support cause the cleaner to
fall down and be damaged.
Cleaning
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
cleaner and filters by air duster. It brings dust into
3
the housing and causes failure.
NOTICE:
before use. Insufficiently dried filters may cause poor
suction and shorten the service life of the motor.
NOTICE:
be sure to re-install them before use. If you use the
cleaner without filters and sponge filter, dust comes
into the motor housing and cause malfunction.
11 ENGLISH
Always be sure that the tool is
Putting the cleaner against the wall
Never use gasoline, benzine, thinner,
Do not blow dust sticking on the
After washing filters, dry them thoroughly
After cleaning filters and sponge filter,