Chapter 10 - Working With Gps; Overview; Assisted Gps Support; Powering The Gps Module - Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin 9900 User Manual
User guide
Hide thumbs
Also See for 9900LUP-6211G0 - Hand Held Products Dolphin 9900:
- Quick start manual (15 pages)
Table of Contents
Advertisement
10
Working with GPS
Overview
The Dolphin 9900 terminal contains an integrated GPS module which allows location tracking of workers
and vehicles, providing better utilization of field assets. Optional mapping and navigation software
provides turn-by-turn driving directions and location information, allowing workers to arrive on time.
Note:
The 9950 and 9951 are not available with GPS.
Assisted GPS Support
The operating system software does not inhibit nor explicitly support assisted GPS modes, which usually
requires installing a vendor-specific client on the terminal that communicates with the GPS module. This
client would then provide the almanac and/or ephemeris data for warm or hot start modes of operation,
allowing a lower time to first fix (TTFS). The Client must be configured on the terminal, active, and provide
the data to the GPS module through the standard COM port.
Powering the GPS Module
The GPS module powers on automatically when accessed by a software application and powers off
automatically when that software application closes. You cannot manually power on and off the GPS
module.
10 - 1
Advertisement
Table of Contents
