Chapter 10 - Dolphin 7600 With Gps; Overview; Gps Functionality; Powering The Gps Module - Honeywell Dolphin 7600 User Manual
Mobile computer with windows mobile 6
Hide thumbs
Also See for Dolphin 7600:
- User manual (142 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
10
Dolphin 7600 with GPS
Overview
GPS functionality can be integrated into certain Dolphin 7600 terminals. There's no need to carry multiple
devices to get the job done because the 7600 integrates into one device powerful mobile computing,
wireless full-area voice and data communications, and advanced GPS functionality.
GPS Functionality
The integrated GPS technology allows location tracking of workers and vehicles, providing better
utilization of field assets. Optional mapping and navigation software provides turn-by-turn driving
directions and location information, allowing workers to arrive on time.
Powering the GPS Module
The GPS module is powered by the I/O Connector, which contains a pin that can power out at 5 volts
(5V). In general, this pin is disabled; however, on 7600s with GPS, this pin powers out by default.
I/O Connector
However, even when the pin is set to power out, the I/O Connector will not power the GPS module during:
• The cold boot process. 5V power out is restored after AutoInstall.
• The warm boot process. 5V power out is restored after the
Today Screen
(see page 2-2) appears.
• Suspend. 5V power out is restored immediately upon resume.
10 - 1
Advertisement
Table of Contents
