Cisco TelePresence SX10 Quick Set
Introduction
Run diagnostics
Sign in to the web interface and navigate to
Diagnostics.
The diagnostics page lists the status for some common sources
of errors
.
*
Errors and critical issues are clearly marked in red color; warnings
are yellow.
*
The messages shown in the illustration serve as examples. Your device may
show other information.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration
Peripherals
Maintenance >
Maintenance
Maintenance
Run diagnostics
Click
Re-run diagnostics
to ensure that
the list is up to date.
Leave standby mode
Click
Wake up the system
to wake up
a device that is in standby mode.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
91
Administrator Guide
Device settings
Appendices