How To Use The Remote Control And The On-Screen User Interface - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

How to use the remote control and the on-screen user interface

The User guide for the video conferencing device describes
in full detail how to operate the device using the TRC6 remote
control.
The TRC5 remote control is not supported.
Access Selfview and Camera Control menu.
Select the device name or address to access
System Information, Settings, Restart and Factory
reset. You can also activate Call forwarding,
Standby, and Do not disturb modes.
Indicates that at least one client is paired
to the device using Proximity.
Time of day
Select Call to invoke
the contacts including
Favorites, Directory and
Recents lists; and to open
the Search or Dial field.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
Place call / Accept incoming call
Select Messages to
invoke the voice mail
system, if available.
Select Share to start
sharing content and to
conduct presentations.
Maintenance
Volume control and
Increase/Decrease control
Field selector / Cursor keys
Go back one step
Keypad
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
188
Administrator Guide
Device settings Appendices Appendices
OK/Enter
Microphone mute/unmute
Reject incoming call /
End call / Cancel /
1 2 3
.@ abc def Back to Home screen
4 5 6
(outside calls)
ghi jkl mno
7 8 9
pqrs tuv wxyz
*
0 #
TRC6 remote
control
Operating tips
Use the Cursor keys to move about the screen.
Press OK/Enter to open the selected menu field.
Use the Cancel key to exit a menu (and return to the
Home screen), undoing any changes. Use the Back
key to go just one step back.