Share Content Using The Web Interface - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Share content using the web interface

Sign in to the web interface and navigate to
Share content
1. Choose which content source to share in
the Presentation source drop down list.
2. Click Start Presentation. Then the text
changes to Stop Presentation.
Stop content sharing:
Click the Stop Presentation button that is
present while sharing.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
Call Control.
Maintenance
Presentation source
drop down list
Choose which input
source to share, from the
drop down list.
Snapshot area
Shows snapshots of the
selected presentation
source.
Only available on devices
that have the Remote
Monitoring option.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
194
Administrator Guide
Device settings Appendices Appendices
About content sharing
You can connect a presentation source
to one of the video inputs of your device.
Most often a PC is used as presentation
source, but other options may be
available depending on your device
setup.
While in a call you can share content with
the other participant in the call (far end).
If you are not in a call, the content is
shown locally.