Open Tcp Ports - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Open TCP Ports

The web server within the codec prohibit or restrict the use of
nonsecure or unnecessary ports, protocols, modules, and/or
services. Some ports are open by default.
TCP 22: SSH
You can close the port by setting SSH mode to Off.
NetworkServices SSH Mode: Off / On
TCP 80: HTTP
You can close the port by setting HTTP mode to Off or HTTPS.
NetworkServices HTTP Mode: HTTP+HTTPS / HTTPS / Off
TCP 443: HTTPS
You can close the port by setting HTTP mode to Off.
NetworkServices HTTP Mode: HTTP+HTTPS / HTTPS / Off
TCP 4043: Remote pairing software download
You can close the port by setting remote pairing for the Touch
panel to Off.
Peripherals Pairing CiscoTouchPanels RemotePairing: Off / On
TCP 4045: Remote pairing version information
You can close the port by setting remote pairing for the Touch
panel to Off.
Peripherals Pairing CiscoTouchPanels RemotePairing: Off / On
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
TCP 4047: Remote pairing session connection
The port is only available (and open) when a Touch panel is
remote paired with the video conferencing device. You can close
the port by setting remote pairing for the Touch panel to Off.
Peripherals Pairing CiscoTouchPanels RemotePairing: Off / On
TCP 4053: Remote pairing port
You can close the port by setting remote pairing for the Touch
panel to Off.
Peripherals Pairing CiscoTouchPanels RemotePairing: Off / On
TCP 5060/5061: SIP listen ports
The SIP listen ports are open by default. The SIP listen ports are
disabled by the Cisco UCM (Unified Communication Manager).
You can close the ports by setting the SIP listen ports to Off.
SIP ListenPort: Off / On
TCP 65533: Alternate port for Proximity connections
The port is closed by default. The port is open for Proximity
connections when the setting to enable an alternate port for
Proximity is set to True.
Proximity AlternatePort Enabled: False / True
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
208
Administrator Guide
Device settings Appendices Appendices
The device settings are configured from
the Setup > Configuration page on the
web interface. Open a web browser and
enter the IP address of the device then
sign in.