Tour The Screen And The Remote Control - Cisco Telepresence SX10 User Manual

5 Introduction to Video Conferencing

Tour the screen and the remote control

Access
Settings,
Standby mode
and the Do Not
Disturb feature.
Use this to place
When set to Do Not Disturb, ringtones are muted and call attempts made by others to reach you will appear as
missed calls. You may, however, place calls as much as you like.
As default, there is a 60 minutes timeout on the Do not disturb (after which the system will return to normal
operation), but this may have been changed to a different setting by your Video Support Team.
Access the
Camera Control
menu.
Use this to share
calls. content.
Volume control and Increase/Decrease control
Field selector/
Cursor keys
Go back one step
Place call /
Accept incoming call
1 2 3
.@ abc def
4 5 6
ghi jkl mno
Keypad
7 8 9
pqrs tuv wxyz
*
0 #
Operating tips
Use the Cursor controls to move
about the screen and press OK/
Enter to open the selected menu
field.
OK/Enter
Use the Cancel key to exit a menu
(and return to the Home screen)
undoing any changes. Use the Back
key to go just one step back.
Microphone mute/
unmute
Reject incoming call /
End call / Cancel /
Back to Home screen
(outside calls)
D1509703 User Guide Cisco TelePresence SX10
Produced: July 2014 for TC7.2
All contents © 2014
Cisco Systems, Inc. All rights reserved.