Draytek Vigor2866 Series Quick Start Manual page 9

LED
Left
LAN
LED
P1~P5
Right
LED
The port "WAN2 / P6" is switchable. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB1~2
WAN2 / P6
LAN P1-P5
Phone 1/2
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
Description
Wireless band will be switched /changed according to the
button pressed and released. For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released the
button once.
 2.4G (On) and 5G (Off) – pressed and released the
button twice.
 2.4G (Off) and 5G (Off) – pressed and released the
button three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client's
device making network connection through WPS.
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more
than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
Connecter for local network devices or modem for
accessing Internet.
Connecters for local network devices.
Connecter for analog phone(s).
3