Horizon Fitness T303 Owner's Manual page 14

ASSEMBLY STEP 4
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
(STEP E)
5
1
14
HARDWARE FOR STEP 4
DESCRIPTION
M8X1.25PX15L
8.2X13.5X2.0T
8.2X15.0X1.2T
A B C
4
NOTE: Be careful not to pinch any
wires while assembling the console.
QTY
4
A Open HARDWARE FOR STEP 4.
4
4 B Gently place the CONSOLE (5) on top of the
CONSOLE MASTS (1&4). Attach the LEFT SIDE
first using 2 BOLTS (A), 2 SPRING WASHERS (B)
and 2 FLAT WASHERS (C).
The CONSOLE CABLES (6) are tucked into the
C
CONSOLE MAST (4). Using the lead wire
carefully pull the CONSOLE CABLE (6) out of
the CONSOLE MAST (4). Detach and discard the
LEAD WIRE. Connect the CONSOLE CABLES (6)
and carefully tuck wires in masts to avoid damage.
D Attach the RIGHT SIDE of the CONSOLE (5) using 2
6
BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
E Pull the top of the CONSOLE (5) towards the back of
the treadmill and HOLD while TIGHTENING THE
LEFT AND RIGHT SIDE BOLTS (A).
A B C