Makita DG001G Instruction Manual
Cordless earth auger
Hide thumbs
Also See for DG001G:
- Instruction manual (81 pages) ,
- Instruction manual (69 pages) ,
- Instruction manual (81 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DG001G
Summary of Contents for Makita DG001G
- Page 1 INSTRUCTION MANUAL Cordless Earth Auger DG001G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DG001G No load speed High 0 - 1,500 min 0 - 400 min Drilling capacities For sandy soil: ø200 mm (Diameter) For clay soil: ø150 mm Overall length 842 mm *1 Rated voltage D.C. 36 V - 40 V max Net weight 7.2 - 8.1 kg... -
Page 3: Ec Declaration Of Conformity
Work area safety WARNING: Wear ear protection. Keep work area clean and well lit. Cluttered or WARNING: dark areas invite accidents. The noise emission during actual use of the power tool can differ from the declared Do not operate power tools in explosive atmo- value(s) depending on the ways in which the tool is spheres, such as in the presence of flammable used especially what kind of workpiece is processed. - Page 4 Dress properly. Do not wear loose clothing or Keep cutting tools sharp and clean. Properly jewellery. Keep your hair and clothing away maintained cutting tools with sharp cutting edges from moving parts. Loose clothes, jewellery or are less likely to bind and are easier to control. long hair can be caught in moving parts.
- Page 5 15. If something wrong with the tool such as For preparation of the item being shipped, consult- abnormal sounds, stop operating immediately ing an expert for hazardous material is required. and ask your local Makita Service Center for Please also observe possibly more detailed repair. national regulations.
-
Page 6: Initial Setting
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum Main tool... -
Page 7: Setting Up The Tool
Installing the reaction receiver Setting up the tool Place the reaction receiver so that the bar of the reac- tion receiver comes to the left side of the operator. CAUTION: Always be sure that the side Adjust the position of the reaction receiver so that the handle and the reaction receiver are installed axis of the drill chuck is in the center of the operator's securely before operation. -
Page 8: Functional Description
Tool / battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a tool/battery protection sys- tem. This system automatically cuts off power to the motor to extend tool and battery life. The tool will auto- CAUTION: matically stop during operation if the tool or battery is Always be sure that the tool is placed under one of the following conditions: switched off and the battery cartridge is removed before adjusting or checking function on the tool. - Page 9 Switch action Reversing switch action CAUTION: CAUTION: Before installing the battery car- Always check the direction of tridge into the tool, always check to see that the rotation before operation. switch trigger actuates properly and returns to CAUTION: Use the reversing switch only after the "OFF"...
-
Page 10: Electronic Function
Mode indicator status Operation switch trigger is released, have the tool serviced at a mode Makita service center. Blinking Soft start feature High speed mode This function allows the smooth start-up of the tool by limiting the start-up torque. - Page 11 Mounting the auger bit on the bit CAUTION: Always install the battery cartridge fully adapter until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. NOTE: The shape and mechanism of the auger bit CAUTION: Do not install the battery cartridge and the auger pin may vary depending on your auger forcibly.
-
Page 12: Digging Operation
Digging operation OPERATION CAUTION: Hold the tool firmly when operat- CAUTION: This is a powerful tool which gen- ing the tool. erates high torque. It is important that the tool is CAUTION: When leaving the tool, such as securely held and properly braced. during a break, do not leave the tool stabbed in CAUTION: Before operating, check that there... -
Page 13: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885872A228 www.makita.com 20210217...