Casio DT-X10 Series User Manual page 39

1 AC Adapter Jack
2 Wall Mount Unit
Fastening Plate
3 Power Contacts
4 Power Indicator
Lamp
5 Power Switch
6 Desktop Unit
7 DIP Switches
E-44
Connect the bundled AC adapter here.
The holes in this plate accept screws that secure the wall mount
unit in place.
Power is supplied to the Handheld Terminal via these contacts.
This lamp indicates the power status and the connection status
of the Handheld Terminal.
Off: Power off
Red: Power on, Handheld Terminal not mounted
Green: Power on, Handheld Terminal mounted correctly
Turns power on and off.
This is the base when using the Satellite Cradle in a desktop
configuration. Remove the desktop unit in the case of a wall-
mount configuration.
Use these switches to configure the Satellite Cradle as required.